SENSBLUE ATLAS/Datasheet: Difference between revisions

@@ Line 602: / Line 602: @@
 === 22. Network Information ===
-There is three ways to connect to the device. IP and state of the connection be checked on the LCD Network Interface.
+There are three ways to connect to the device. The IP and connection status can be checked on the LCD by cycling to the Network screen.
-==== 22.1 Eth1 (ethO) ====
+==== 22.1 ETH1 ====
-Client dynamic IP obtained by DHCP server.
+By default, the ETH1 port has the following configuration:
-==== 22.2 Eth2 (eth1) ====
+* Network interface: eth0
-Static IP: '''93.48.86.253'''
+* Connection type: DHCP client.
+* IP Address: Dynamic IP address provided by an external DHCP server.
-==== 22.3 Access Point (wlanO) ====
+==== 22.2 ETH2 ====
-IP: '''192.168.30.1'''
+By default, the ETH2 port has the following configuration:
+* Network interface: eth1
+* Connection type: Static IP
+* IP Address: 93.48.86.253
+==== 22.3 Access Point ====
+By default, ATLAS provides an Access Point configured with the following settings:
+* Network interface: wlan0
+* SSID: atlas-<SERIAL_NUMBER>-AP
+* Password: atlas_2025!
+* Connection type: DHCP Server
+* IP Address: 192.168.30.1
 === 23. Software Information ===
@@ Line 640: / Line 654: @@
 |Not  defined, configured on first time interface login.
 |-
-|GUI on
+|GUI
 |http://<device-ip>:1880
 |http://<device-ip>:3000