Jump to content

SENSBLUE MONARCH: Difference between revisions

← Older edit
VisualWikitext
 
(16 intermediate revisions by the same user not shown)
Line 393: Line 393:


=== 9. Probes ===
=== 9. Probes ===
{| class="wikitable"
{{SimilarProductsTable}}
|
|'''Name'''
|'''Firmware  v.'''
|'''Requirements'''
|-
|PA000000065
| [[Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000085
|[[Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000091
|SENSBLUE RS-485 Dissolved CO2 Sensor Probe AT-SB-PROBE-CO2-P-5000-C1, w/ 15m cable w/connector
|
|
|-
|PA000000086
| [[Low Conductivity Probe AT-SB-PROBE-LC-P-C1|SENSBLUE RS-485 Low Conductivity Probe AT-SB-PROBE-LC-P-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000087
|SENSBLUE RS-485 Medium Conductivity Probe AT-SB-PROBE-MC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000068
|SENSBLUE RS-485 High Conductivity Probe AT-SB-PROBE-HC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000089
|SENSBLUE RS-485 Salinity/Conductivity/TDS Probe AT-SB-PROBE-S-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000067
| [[RS-485 pH Probe AT-SB-PROBE-pH-P|RS-485 pH Probe AT-SB-PROBE-pH-P-C1, w/ 15m cable w/conector]]
|10.70
|
|-
|PA000000088
|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000069
|SENSBLUE RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000090
| [[RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P|SENSBLUE RS-485 Ammonia Nitrogen (NH4-N) Sensor Probe AT-SB-PROBE-NH4-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000066
| [[RS-485 Turbidity Probe AT-SB-PROBE-T-P|SENSBLUE RS-485 Turbidity Probe AT-SB-PROBE-T-P-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000073
| [[Multiparameter Probe AT-SB-PROBE-MP-P-C1|SENSBLUE RS-485 Multiparameter Probe AT-SB-PROBE-MP-P-C1, w/ 15m cable w/connector]]
|10.71
|
|}


=== 10. Accessories ===
=== 10. Accessories ===
Line 527: Line 457:
[[File:Picture3.png|frameless|824x824px|left]]
[[File:Picture3.png|frameless|824x824px|left]]


 
<br clear="all" />
 
 
 
 
 
 
 
 
 
 


== Quick Instalation Guide ==
== Quick Instalation Guide ==
Line 544: Line 464:
 What you´ll need:
 What you´ll need:
[[File:WhatUGet.png|center|frameless|841x841px]]
[[File:WhatUGet.png|center|frameless|841x841px]]
<br>
'' '''*Note that an antenna is only required if your model version has an external antenna connector. The same applies to the number of probes that can be used (one probe per connector).'''''
'' '''*Note that an antenna is only required if your model version has an external antenna connector. The same applies to the number of probes that can be used (one probe per connector).'''''


Line 550: Line 471:


  1 - Install the antenna by tighten it by hand only. Do not overtighten to avoid damaging the sealing.
  1 - Install the antenna by tighten it by hand only. Do not overtighten to avoid damaging the sealing.
<br>
[[File:Step1.png|center|frameless|461x461px]]
[[File:Step1.png|center|frameless|461x461px]]
<br>


=== Step 2 - Connecting Your Probe ===
=== Step 2 - Connecting Your Probe ===
Line 567: Line 491:
'''''*If your model includes a second probe, repeat steps 2 and 3 for the second connector.'''''  
'''''*If your model includes a second probe, repeat steps 2 and 3 for the second connector.'''''  
[[File:Step2and3.png|center|frameless|638x638px]]
[[File:Step2and3.png|center|frameless|638x638px]]
<br>


=== Step 3 - Open the MONARCH ===
=== Step 3 - Open the MONARCH ===
Line 575: Line 500:
  5 - Remove the label located on the battery holder. At this moment, the electronic unit will be powered on and will initiate its first startup.
  5 - Remove the label located on the battery holder. At this moment, the electronic unit will be powered on and will initiate its first startup.


'''''*The internal LED will begin to flash Cyan. For detailed information regarding the startup process and communication interfaces,''''' '''''see:''''' [[#3. Communication Interfaces|Communication Interfaces]]
'''''*The internal LED will begin to flash Cyan. For detailed information regarding the startup process and communication interfaces,''''' '''''see:''''' [[SENSBLUE MONARCH#3. Communication Interfaces|'''''Communication Interfaces''''']]
<br>
 
[[File:Step3.png|center|frameless|735x735px]]
 
<br>
 
=== Step 4 - Data Verification & Dashboard Access ===
  6 - Access this by scanning the QR code supplied with the device.
 
Once transmission is complete, verify the data on your Dashboard.
 
<br>
[[File:Step4.png|center|frameless|420x420px]]
<br>
 
''' ''*Scan this QR Code to preview your data on a demo dashboard.'''''
 
  7 - The Dashboard displays the latest transmissions from the installation process. It can be viewed on both mobile devices and computers.
 
 
[[File:Step5.png|center|frameless|620x620px]]
 
 
The process is now complete. Replace the cover and secure it by tightening the four screws in a '''diagonal pattern''' to ensure an even seal. If you encounter any issues, please contact our support team:
 
•Email: sales@atronia.eu
 
•Phone: +351 934 886 253
 
•Troubleshooting: '''''https://wiki.atronia.eu'''''
Retrieved from "https://wiki.atronia.eu/SENSBLUE_MONARCH"