Jump to content

SENSBLUE MONARCH: Difference between revisions

← Older edit
VisualWikitext
No edit summary
No edit summary
Tag: Manual revert
 
(76 intermediate revisions by the same user not shown)
Line 1: Line 1:
<div class="buy-now-container">
<span class="button-buy-now">[https://atronia.eu/product/monarch/ Buy Now]</span>
</div>
[[File:PA000000074.png|center|frameless|694x694px]]
== Datasheet ==
== Datasheet ==


=== '''1. Features''' ===
=== 1. Features ===
'''Built for the Wild. Engineered for Industry.'''


==== Built for the Wild. Engineered for Industry. ====
Remote monitoring is often required in the most unforgiving places. SENSBLUE MONARCH was explicitly designed for demanding and harsh installation locations where standard equipment often fails.
Remote monitoring is often required in the most unforgiving places. SENSBLUE MONARCH was explicitly designed for demanding and harsh installation locations where standard equipment often fails.


==== '''True efficiency isn’t about doing less. It’s about timing.''' ====
'''True efficiency isn’t about doing less. It’s about timing.'''
 
Engineered to master the balance between granular monitoring and energy conservation. If values are not within range, it will send the data as soon as possible so you can act on time. It is autonomy, redefined.
Engineered to master the balance between granular monitoring and energy conservation. If values are not within range, it will send the data as soon as possible so you can act on time. It is autonomy, redefined.


=== '''1.1 Table of SENSBLUE MONARCH Reference ID Model Number''' ===
==== 1.1 Table of SENSBLUE MONARCH Reference ID Model Number ====
{| class="wikitable"
{| class="wikitable"
|
|
Line 57: Line 64:
|}
|}


=== '''2. General Description''' ===
=== 2. General Description ===
SENSBLUE MONARCH is a multifunctional embedded system designed for industrial and remote monitoring applications.
SENSBLUE MONARCH is a multifunctional embedded system designed for industrial and remote monitoring applications.


It integrates a wide range of communication interfaces, sensor inputs, and control outputs, making it suitable for IoT, telemetry, and simple automation solutions. Powered by a solar panel and internal battery for remote, demanding and harsh installation locations, or, alternatively, by an external power supply.
It integrates a wide range of communication interfaces, sensor inputs, and control outputs, making it suitable for IoT, telemetry, and simple automation solutions. Powered by a solar panel and internal battery for remote, demanding and harsh installation locations, or, alternatively, by an external power supply.


=== '''2.1 Main Features''' ===
==== 2.1 Main Features ====
 
* Integrated Solar Panel (in specific model versions)
* Integrated Solar Panel (in specific model versions)
* Internal 18650 lithium-ion Battery
* Internal 18650 lithium-ion Battery
Line 73: Line 79:
* FOTA (Firmware Over the Air Update)
* FOTA (Firmware Over the Air Update)


=== '''3.2 Technical Specifications''' ===
==== 2.2 Technical Specifications ====
{| class="wikitable tech-table"
{| class="wikitable tech-table"
!'''Parameter'''
!'''Parameter'''
Line 85: Line 91:
|-
|-
|Power Supply
|Power Supply
| - (Li-Ion 18650) Internal battery + Solar panel<br>
| - (Li-Ion 18650) Internal battery + Solar panel<br>- 12-24V External power
  - 12-24V External power
|-
|-
|Protections
|Protections
Line 100: Line 105:
|Polycarbonate
|Polycarbonate
|}
|}
=== 3. Communication Interfaces ===
SENSBLUE MONARCH supports the following communication interfaces:
{| class="wikitable tech-table led-table"
! colspan="6" |'''RS485'''
|-
| colspan="6" |local  12V DC/DC boost converter (max100mA)
|-
! colspan="6" |'''Wi-Fi'''
|-
| colspan="6" |2.4  GHz Wi-Fi 802.11 b/g/n with HT20 / HT40
|-
| colspan="6" |Centre  frequency range of operating channel: 2412 ~ 2484 MHz
|-
! colspan="6" |'''GSM - Quectel BG95-M3:'''
|-
| colspan="4" rowspan="2" |Cat M1
| colspan="2" |B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/
|-
| colspan="2" |B25/B26/B27/B28/B66/B85
|-
| colspan="4" rowspan="2" |Cat NB2
| colspan="2" |B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/
|-
| colspan="2" |B25/B28/B66/B71/B85
|-
| colspan="4" |EGPRS
| colspan="2" |GSM850/EGSM900/DCS1800/PCS1900
|-
| colspan="4" |LTE  Bands Power Class
| colspan="2" |Power  Class 5 (21 dBm)
|-
! colspan="6" |'''HMI'''
|-
| colspan="6" |RGB LEDs
|-
| colspan="6" |Internal OLED Display 0.96”
|-
| colspan="6" |Push-button, Reset-button
|-
! colspan="6" |'''Led behaviour'''
|-
| colspan="2" |'''Colour'''
|'''Meaning'''
| colspan="3" |'''Description'''
|-
| rowspan="3" class="led-cyan" |
| rowspan="3" |Cyan
| rowspan="3" |Normal  Operation
| colspan="3" |The device is starting up.
|-
| colspan="3" |Sensors are being initialized or  read.
|-
| colspan="3" |The system is operating normally.
|-
| rowspan="3" class="led-blue" |
| rowspan="3" |Blue
| rowspan="3" |Connectivity
| colspan="3" |The device is connecting to the  network (GSM or Wi-Fi).
|-
| colspan="3" |The device is communicating with  the server.
|-
| colspan="3" |A periodic blue blink means the  device is waiting for network access.
|-
| rowspan="3" class="led-green" |
| rowspan="3" |Green
| rowspan="3" |Success
| colspan="3" |Data is being transmitted.
|-
| colspan="3" |A short green blink indicates  each data transmission.
|-
| colspan="3" |A steady green light means the  communication was completed successfully.
|-
| rowspan="2" class="led-orange" |
| rowspan="2" |Orange
| rowspan="2" |Warning
| colspan="3" |Data was sent but no confirmation  was received.
|-
| colspan="3" |A temporary or partial  communication issue occurred.
|-
| rowspan="3" class="led-red" |
| rowspan="3" |Red
| rowspan="3" |Error
| colspan="2" rowspan="3" |Blinking patterns indicate  different types of errors:
|1 blink: Communication error
|-
|2 blinks: SIM card error
|-
|3 blinks: Network or  configuration error
|}
=== 4. RSSI levels, valid for Wi-Fi and LTE: ===
{| class="wikitable"
|'''Excellent'''
|From  0 to -51 dBm
|-
|'''Good'''
|From −52 to −64 dBm
|-
|'''Medium'''
|From −65 to −94 dBm
|-
|'''Poor'''
|From −95 to −125 dBm
|}
=== 5. Power Supply ===
Multiple power inputs characteristics
{| class="wikitable tech-table"
|'''External DC/DC Power Supply'''
| colspan="2" |12 – 24VDC
|-
| rowspan="6" |'''Battery  Input'''
| colspan="2" |4.2V  Battery Li-Ion 18650
|-
| colspan="2" |2900mAh
|-
| rowspan="2" |Working  Temperature
|Charge:  -20ºC ~ 60ºC
|-
|Discharge:  -40ºC ~ 85ºC
|-
| rowspan="2" |On-board  measurement
|Range:  0–100%
|-
|Resolution:  1%
|-
| rowspan="2" | '''USB'''
| colspan="2" |Type  C connector
|-
| colspan="2" |5V  only
|-
| '''Solar panel'''
| colspan="2" |For  charging internal battery only
|}
<br>
=== 6. Hardware Block Diagram ===
<br>
[[File:Hardware Block Diagram 2.0.png|center|frameless|800x800px]]
<br>
=== 7. Internal Pinout Diagram ===
<br>
[[File:Mother Board 01.png|center|frameless|800x800px]]
<br>
{| class="wikitable tech-table pinout-table"
|1
|12V Sensor power Out
|12
|ASP (Application-Specific Port)
|-
|2
|RS485  A+
|13
|5-24V  External Power Supply
|-
|3
|RS485 B-
|14
|GND
|-
|4
|GND
|15
|GND
|-
|5
|Same  as 1
|16
|ASP (Application-Specific Port)
|-
|6
|Same  as 2
|17
|ASP (Application-Specific Port)
|-
|7
|Same  as 3
|18
|ASP (Application-Specific Port)
|-
|8
|Same  as 4
|19
|ASP (Application-Specific Port)
|-
|9
|ASP  (Application-Specific Port)
|20
|Nano  Sim Holder
|-
|10
|ASP  (Application-Specific Port)
|21
|18650 Battery
|-
|11
|ASP (Application-Specific Port)
|22
|Type C USB connector
|}
<br>
=== 8. External Connectors Electrical Pinout Diagram & Mechanical Dimensions (mm) ===
<br>
[[File:Side View wiki.png|center|frameless|634x634px]]
<br>
{| class="wikitable tech-table"
|'''Left/Centre Connector'''
|'''Right Connector'''
|-
|CA6GD  Female 7-pin (6+PE) IP67 HIRSCHMANN Pinout:
|CA6GS  Male 7-pin (6+PE) IP67 HIRSCHMANN Pinout:
|-
|1  - 12V Sensor power Out
|1  - External Power Supply (12V-24V)
|-
|2  - GND
|2  – GND
|-
|3  - RS485 A+
|3  – ASP  (Application-Specific Port)
|-
|4  - RS485 B-
|4  – ASP  (Application-Specific Port)
|-
|5  - ASP  (Application-Specific Port)
|5  - RS485 B-
|-
|6  - External power supply (12V-24V)
|6  - RS485 A+
|-
|7  -  ASP (Application-Specific Port)
|7  - 12V Sensor power Out
|}
<br>
[[File:Top View.png|center|frameless|800x800px]]
<br>
[[File:Front View.png|center|frameless|800x800px]]
<br>
<div class="two-tables">
{| class="wikitable tech-table small-table"
!'''European Directives'''
|-
|Directive  2014/53/EU (RED)
|-
|Directive  2014/30/EU (EMC)
|-
|Directive  2011/65/EU (RoHS)
|}
{| class="wikitable tech-table small-table"
!'''Applicable harmonized standards'''
|-
|EN  61326-1
|-
|EN  62368-1
|-
|ETSI  EN 301 489-1 / -17 / -52
|-
|ETSI  EN 300 328
|-
|ETSI  EN 301 908-1 / -13
|}
</div>
=== 9. Probes ===
{| class="wikitable"
|
|'''Name'''
|'''Firmware  v.'''
|'''Requirements'''
|-
|PA000000065
| [[Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000085
|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000091
|SENSBLUE RS-485 Dissolved CO2 Sensor Probe AT-SB-PROBE-CO2-P-5000-C1, w/ 15m cable w/connector
|
|
|-
|PA000000086
| [[Low Conductivity Probe AT-SB-PROBE-LC-P-C1|SENSBLUE RS-485 Low Conductivity Probe AT-SB-PROBE-LC-P-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000087
|SENSBLUE RS-485 Medium Conductivity Probe AT-SB-PROBE-MC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000068
|SENSBLUE RS-485 High Conductivity Probe AT-SB-PROBE-HC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000089
|SENSBLUE RS-485 Salinity/Conductivity/TDS Probe AT-SB-PROBE-S-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000067
| [[RS-485 pH Probe AT-SB-PROBE-pH-P|RS-485 pH Probe AT-SB-PROBE-pH-P-C1, w/ 15m cable w/conector]]
|10.70
|
|-
|PA000000088
|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000069
|SENSBLUE RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000090
| [[RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P|SENSBLUE RS-485 Ammonia Nitrogen (NH4-N) Sensor Probe AT-SB-PROBE-NH4-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000066
| [[RS-485 Turbidity Probe AT-SB-PROBE-T-P|SENSBLUE RS-485 Turbidity Probe AT-SB-PROBE-T-P-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000073
| [[Multiparameter Probe AT-SB-PROBE-MP-P-C1|SENSBLUE RS-485 Multiparameter Probe AT-SB-PROBE-MP-P-C1, w/ 15m cable w/connector]]
|10.71
|
|}
=== 10. Accessories ===
{| class="wikitable"
|
|'''Name'''
|'''Requirements'''
|-
|PA000000020
|SENSBLUE  MONARCH RS485 Probe Splitter Box (1 input -> 2 outputs)
|
|-
|PA000000046
|SENSBLUE  MONARCH Power Supply (EU) 230VAC/12V@1A CA6LD
|
|-
|PA000000092
|SENSBLUE  MONARCH External Solar Panel 60W W/ Battery LiFePO4 12v 20Ah
|
|-
|MP000000428
|SENSBLUE  IoT Data Card 500MB
|
|-
|MP000000431
|N-Type  Antenna Cable 1m Male to Male
|
|-
|MP000000432
|N-Type  Antenna Cable 1m Male to Female
|
|-
|MP000000429
| [[Straight N-Type Outdoor Antenna|Straight  N-Type Outdoor Antenna]]
|
|-
|MP000000430
|Panel  Mount Cellular N Type Antenna
|
|}
=== 11. Document History ===
{| class="wikitable"
|'''Version'''
|'''Description'''
|'''Date'''
|-
|SBMDATA v1.0
|First  version of SENSBLUE MONARCH Datasheet
|16/02/2026
|}
=== 12. MONARCH in-the-field ===
<br>
<div class="image-row">
[[File:Picture2.jpg|left|frameless|535x535px]]
[[File:Picture1.jpg|left|frameless|535x535px]]
</div>
[[File:Picture3.png|frameless|824x824px|left]]
Retrieved from "https://wiki.atronia.eu/index.php?title=SENSBLUE_MONARCH"