ATRONIA Wiki - Recent changes [en]

SENSBLUE ATLAS

WikiManagement — Mon, 13 Jul 2026 16:51:34 GMT

← Older revision		Revision as of 16:51, 13 July 2026
(One intermediate revision by the same user not shown)
Line 12:		Line 12:
	<td style="padding: 0 0 0 10px; border: none; background: transparent;">		<td style="padding: 0 0 0 10px; border: none; background: transparent;">
	<span class="atlas-btn">[[SENSBLUE ATLAS/Realease Notes\|Realease Notes]]</span>		<span class="atlas-btn">[[SENSBLUE ATLAS/Realease Notes\|Realease Notes]]</span>
			</td>
			<td style="padding: 0 0 0 10px; border: none; background: transparent;">
			<span class="atlas-btn">[[SENSBLUE ATLAS/Home Assistant\|Home Assistant]]</span>
			</td>
			<td style="padding: 0 0 0 10px; border: none; background: transparent;">
			<span class="atlas-btn">[[SENSBLUE ATLAS/Node-RED\|Node-RED]]</span>
			</td>
			<td style="padding: 0 0 0 10px; border: none; background: transparent;">
			<span class="atlas-btn">[[SENSBLUE ATLAS/Fast Deploy\|Fast Deploy]]</span>
	</td>		</td>
	</tr>		</tr>

Salinity Conductivity TDS Probe AT-SB-PROBE-S-P-C1

WikiManagement — Mon, 13 Jul 2026 11:56:30 GMT

@@ Line 439: / Line 439: @@
 |}
-=== 10. Applicable Accessories ===
+=== 10. Applicable Gateways & Accessories ===
-=== 11. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
 === 12. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

RS-485 Turbidity Probe AT-SB-PROBE-T-P

WikiManagement — Mon, 13 Jul 2026 11:56:07 GMT

@@ Line 350: / Line 350: @@
 b) COM：Received function code
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-=== 9. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 9. Other Probes ===
-'''10. Applicable certifications and standards'''
+{{Other Probes}}
-  EMC Directive 2014/30/EU.
+=== 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

RS-485 pH Probe AT-SB-PROBE-pH-P

WikiManagement — Mon, 13 Jul 2026 11:55:08 GMT

@@ Line 405: / Line 405: @@
 e) COM : Received function code
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-=== 9. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 9. Other Probes ===
 === 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P

WikiManagement — Mon, 13 Jul 2026 11:53:40 GMT

@@ Line 306: / Line 306: @@
 b) COM：Received function code
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-=== 9. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 9. Other Probes ===
 === 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Multiparameter Probe AT-SB-PROBE-MP-P-C1

WikiManagement — Mon, 13 Jul 2026 11:53:13 GMT

@@ Line 408: / Line 408: @@
 |}
-=== 7. Applicable Accessories ===
+=== 7. Applicable Gateways & Accessories ===
-=== 8. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 8. Other Probes ===
 === 9. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Low Conductivity Probe AT-SB-PROBE-LC-P-C1

WikiManagement — Mon, 13 Jul 2026 11:52:45 GMT

@@ Line 316: / Line 316: @@
 b) COM: Received function
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-=== 9. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 9. Other Probes ===
 === 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1

WikiManagement — Mon, 13 Jul 2026 11:52:14 GMT

@@ Line 383: / Line 383: @@
 |}
-=== 10. Applicable Accessories ===
+=== 10. Applicable Gateways & Accessories ===
-=== 11. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
+=== 11. Other Probes ===
 === 12. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Template:Other Probes

WikiManagement — Mon, 13 Jul 2026 11:50:30 GMT

← Older revision		Revision as of 11:50, 13 July 2026
Line 45:		Line 45:
	\|		\|
	\|-		\|-
	\|		\|PA000000088
	\|[[RS-485 ORP Probe POM AT-SB-PROBE-ORP-P\|SENSBLUE RS-485 ORP Probe POM AT-SB-PROBE-ORP-P, w/ 15m cable w/conector]]		\|[[RS-485 ORP Probe POM AT-SB-PROBE-ORP-P\|SENSBLUE RS-485 ORP Probe POM AT-SB-PROBE-ORP-P, w/ 15m cable w/conector]]
	\|
	\|
	\|-
	~~\|PA000000088~~
	~~\|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1\|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1, w/ 15m cable w/connector~~
	\|		\|
	\|		\|

RS-485 ORP Probe POM AT-SB-PROBE-ORP-P

WikiManagement — Mon, 13 Jul 2026 11:48:54 GMT

@@ Line 326: / Line 326: @@
 b) COM: Received function code
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-=== 9. Similar Products ===
+{{Applicable Gateways & Accessories}}
-{{SimilarProductsTable}}
 === 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Template:Other Probes

WikiManagement — Mon, 13 Jul 2026 11:46:15 GMT

← Older revision		Revision as of 11:46, 13 July 2026
(One intermediate revision by the same user not shown)
Line 43:		Line 43:
	\|[[RS-485 pH Probe AT-SB-PROBE-pH-P\|SENSBLUE RS-485 pH Probe AT-SB-PROBE-pH-P, w/ 15m cable w/conector]]		\|[[RS-485 pH Probe AT-SB-PROBE-pH-P\|SENSBLUE RS-485 pH Probe AT-SB-PROBE-pH-P, w/ 15m cable w/conector]]
	\|10.70		\|10.70
			\|
			\|-
			\|
			\|[[RS-485 ORP Probe POM AT-SB-PROBE-ORP-P\|SENSBLUE RS-485 ORP Probe POM AT-SB-PROBE-ORP-P, w/ 15m cable w/conector]]
			\|
	\|		\|
	\|-		\|-

Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1

WikiManagement — Mon, 13 Jul 2026 11:39:45 GMT

@@ Line 454: / Line 454: @@
 b) COM：Received function code
-=== 8. Applicable Accessories ===
+=== 8. Applicable Gateways & Accessories ===
-{| class="wikitable"
+{{Applicable Gateways & Accessories}}
 === 9. Other Probes ===
@@ Line 502: / Line 463: @@
 === 10. Applicable certifications and standards ===
-* '''EN IEC 61326-1: 2021'''
+{{Applicable certifications and standards}}

Template:Applicable certifications and standards

WikiManagement — Mon, 13 Jul 2026 11:39:18 GMT

Created page with "EMC Directive 2014/30/EU. * '''EN IEC 61326-1: 2021''' * '''EN 55011: 2016+A2: 2021''' * '''EN IEC 61000-3-2: 2019+A1: 2021''' * '''EN 61000-3-3: 2013+A2: 2021'''"

New page

EMC Directive 2014/30/EU.

* '''EN IEC 61326-1: 2021'''
* '''EN 55011: 2016+A2: 2021'''
* '''EN IEC 61000-3-2: 2019+A1: 2021'''
* '''EN 61000-3-3: 2013+A2: 2021'''

Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1

WikiManagement — Mon, 13 Jul 2026 11:37:16 GMT

← Older revision		Revision as of 11:37, 13 July 2026
Line 497:		Line 497:
	\|}		\|}

	=== 9. ~~Similar Products~~ ===		=== 9. Other Probes ===

	{{~~SimilarProductsTable~~}}		{{Other Probes}}

	=== 10. Applicable certifications and standards ===		=== 10. Applicable certifications and standards ===

Template:SimilarProductsTable

WikiManagement — Mon, 13 Jul 2026 11:36:34 GMT

WikiManagement moved page Template:SimilarProductsTable to Template:Other Probes Misspelled title

New page

{| class="wikitable"
|
|'''Name'''
|'''Firmware v.'''
|'''Requirements'''
|-
|PA000000065
|[[Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000085
|[[Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1|SENSBLUE RS-485 Dissolved Oxygen Probe AT-SB-PROBE-DO-T-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000091
|SENSBLUE RS-485 Dissolved CO2 Sensor Probe AT-SB-PROBE-CO2-P-5000-C1|SENSBLUE RS-485 Dissolved CO2 Sensor Probe AT-SB-PROBE-CO2-P-5000-C1, w/ 15m cable w/connector
|
|
|-
|PA000000086
|[[Low Conductivity Probe AT-SB-PROBE-LC-P-C1|SENSBLUE RS-485 Low Conductivity Probe AT-SB-PROBE-LC-P-C1, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000087
|SENSBLUE RS-485 Medium Conductivity Probe AT-SB-PROBE-MC-P-C1|SENSBLUE RS-485 Medium Conductivity Probe AT-SB-PROBE-MC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000068
|SENSBLUE RS-485 High Conductivity Probe AT-SB-PROBE-HC-P-C1|SENSBLUE RS-485 High Conductivity Probe AT-SB-PROBE-HC-P-C1, w/ 15m cable w/connector
|10.70
|
|-
|PA000000089
|[[Salinity Conductivity TDS Probe AT-SB-PROBE-S-P-C1|SENSBLUE RS-485 Salinity/Conductivity/TDS Probe AT-SB-PROBE-S-P-C1, w/ 15m cable w/connector]]
|
|
|-
|PA000000067
|[[RS-485 pH Probe AT-SB-PROBE-pH-P|SENSBLUE RS-485 pH Probe AT-SB-PROBE-pH-P, w/ 15m cable w/conector]]
|10.70
|
|-
|PA000000088
|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1|SENSBLUE RS-485 ORP Probe AT-SB-PROBE-ORP-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000069
|[[RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P|SENSBLUE RS-485 Nitrates (NO3) Probe AT-SB-PROBE-NO3-P, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000090
|SENSBLUE RS-485 Ammonia Nitrogen (NH4-N) Sensor Probe AT-SB-PROBE-NH4-P-C1|SENSBLUE RS-485 Ammonia Nitrogen (NH4-N) Sensor Probe AT-SB-PROBE-NH4-P-C1, w/ 15m cable w/connector
|
|
|-
|PA000000066
|[[RS-485 Turbidity Probe AT-SB-PROBE-T-P|SENSBLUE RS-485 Turbidity Probe AT-SB-PROBE-T-P, w/ 15m cable w/connector]]
|10.70
|
|-
|PA000000073
|[[Multiparameter Probe AT-SB-PROBE-MP-P-C1|SENSBLUE RS-485 Multiparameter Probe AT-SB-PROBE-MP-P-C1, w/ 15m cable w/connector]]
|10.71
|
|}

Template:Applicable Gateways & Accessories

WikiManagement — Mon, 13 Jul 2026 11:35:33 GMT

Created page with "{| class="wikitable" | |'''Name''' |'''Requirements''' |- |PA000000076 |SENSBLUE MONARCH Solar Panel 1 Probe | |- |PA000000079 |SENSBLUE MONARCH Solar Panel 2 Probes | |- |PA000000080 |SENSBLUE MONARCH Solar Panel 1 Probe External Antenna | |- |PA000000074 |SENSBLUE MONARCH Solar Panel 2 Probes External Antenna | |- |PA000000081 |SENSBLUE MONARCH Opaque Case 1 Probe | |- |PA000000082 |SENSBLUE MONARCH Opaque Case 2 Probes | |- |PA000000083 |SENSBLUE MONARCH Opaque..."

New page

{| class="wikitable"
|
|'''Name'''
|'''Requirements'''
|-
|PA000000076
|SENSBLUE MONARCH Solar Panel 1 Probe
|
|-
|PA000000079
|SENSBLUE MONARCH Solar Panel 2 Probes
|
|-
|PA000000080
|SENSBLUE MONARCH Solar Panel 1 Probe External Antenna
|
|-
|PA000000074
|SENSBLUE MONARCH Solar Panel 2 Probes External Antenna
|
|-
|PA000000081
|SENSBLUE MONARCH Opaque Case 1 Probe
|
|-
|PA000000082
|SENSBLUE MONARCH Opaque Case 2 Probes
|
|-
|PA000000083
|SENSBLUE MONARCH Opaque Case 1 Probe External Antenna
|
|-
|PA000000084
|SENSBLUE MONARCH Opaque Case 2 Probes External Antenna
|
|-
|PA000000020
|SENSBLUE MONARCH RS485 Probe Splitter Box (1 input -> 2 outputs)
|
|}

RS-485 ORP Probe POM AT-SB-PROBE-ORP-P

WikiManagement — Mon, 13 Jul 2026 11:29:23 GMT

← Older revision		Revision as of 11:29, 13 July 2026
Line 235:		Line 235:
	\|Write		\|Write
	\|}		\|}
			'''Note:'''

			a) The register address is the starting address of the register with register type defined according to the Modbus protocol (the actual starting address of the register represented by the hexadecimal system in parentheses).

			b) When changing the sensor address, the sensor address in the return instruction is the new address after the change.

			c)The data definition of the measured value returned when reading the data:

			xx xx xx xx

			2-byte measurement value 2-byte measurement value decimal places

			The default data type is: double-byte integer, high byte first; other types such as floating-point numbers are optional

			==== 7.4 Command example ====
			'''a) Start measurement command'''

			Function: Obtain the ORP measured by the sensor, the unit of ORP is mV.

			Request frame: 06 03 00 00 00 02 C5 BC

			Response frame: 06 03 04 00 78 00 00 0C EA

			Examples of readings:
			{\| class="wikitable mix-table"
			!'''ORP value'''
			\|-
			\|<code>00 78 00 00</code>
			\|}
			For example, ORP value: 00 78 represents the hexadecimal reading ORP value, 00 00 represents the ORP value without a decimal point and no temperature value, converted to a decimal value of 120.

			'''b) Calibration instruction:'''

			The ORP sensor only needs one point calibration. Before calibrating with another calibration solution, the electrode must be cleaned with the latter calibration solution, otherwise it will cause a larger test error.

			In the prepared 86mV or 256mV standard solution, enter the corresponding calibration instructions.


			'''The standard solution is 86mV:'''

			Request frame: 06 06 10 00 00 56 0C 83;

			Response frame: 06 06 10 00 00 56 0C 83;


			'''The standard solution is 256mV:'''

			Request frame: 06 06 10 00 01 00 8D 2D;

			Response frame: 06 06 10 00 01 00 8D 2D

			'''Note:''' The ORP value has a negative value, such as-40mV, its calculation method is:-{FFFF-FFD7 software test value)}=-28; decimal is-40mV.


			'''c) Set the device ID address:'''

			Function: set the MODBUS device address of the electrode.

			Change the device address 06 to 01, with the following example:

			Request frame：06 06 20 02 00 01 E3 BD

			Response frame：06 06 20 02 00 01 E3 BD

			==== 7.5 Error response ====
			If the sensor does not execute the upper computer command correctly, the following format information is returned:
			{\| class="wikitable"
			\|Definition
			\|Address
			\|FC
			\|CODE
			\|CRC check
			\|-
			\|data
			\|ADDR
			\|COM+80H
			\|xx
			\|CRC 16
			\|-
			\|Number of bytes
			\|1
			\|1
			\|1
			\|2
			\|}
			a) CODE： 01 – Functional code error

			03 – Data error

			b) COM: Received function code

			=== 8. Applicable Accessories ===
			{\| class="wikitable"
			\|
			\|'''Name'''
			\|'''Requirements'''
			\|-
			\|PA000000076
			\|SENSBLUE MONARCH Solar Panel 1 Probe
			\|
			\|-
			\|PA000000079
			\|SENSBLUE MONARCH Solar Panel 2 Probes
			\|
			\|-
			\|PA000000080
			\|SENSBLUE MONARCH Solar Panel 1 Probe External Antenna
			\|
			\|-
			\|PA000000074
			\|SENSBLUE MONARCH Solar Panel 2 Probes External Antenna
			\|
			\|-
			\|PA000000081
			\|SENSBLUE MONARCH Opaque Case 1 Probe
			\|
			\|-
			\|PA000000082
			\|SENSBLUE MONARCH Opaque Case 2 Probes
			\|
			\|-
			\|PA000000083
			\|SENSBLUE MONARCH Opaque Case 1 Probe External Antenna
			\|
			\|-
			\|PA000000084
			\|SENSBLUE MONARCH Opaque Case 2 Probes External Antenna
			\|
			\|-
			\|PA000000020
			\|SENSBLUE MONARCH RS485 Probe Splitter Box (1 input -> 2 outputs)
			\|
			\|}

			=== 9. Similar Products ===
			{{SimilarProductsTable}}

			=== 10. Applicable certifications and standards ===
			EMC Directive 2014/30/EU.

			* '''EN IEC 61326-1: 2021'''
			* '''EN 55011: 2016+A2: 2021'''
			* '''EN IEC 61000-3-2: 2019+A1: 2021'''
			* '''EN 61000-3-3: 2013+A2: 2021'''

RS-485 ORP Probe POM AT-SB-PROBE-ORP-P

WikiManagement — Mon, 13 Jul 2026 11:23:04 GMT

Created page with "center|frameless|345x345px == Datasheet == === 1. Introduction === SENSBLUE Monarch ORP Probe POM AT-SB-PROBE-ORP-P can be used for environmental water quality monitoring, acid/alkali/salt solution, chemical reaction process, industrial production process, and can meet the requirements of online ORP measurement for most industrial applications. === 2. Features === * Signal output: RS-485 (Modbus/RTU protocol). * Conveniently c..."

New page

[[File:ORP-100-PH-10-ORP-10-PH-100.png|center|frameless|345x345px]]

== Datasheet ==

=== 1. Introduction ===
SENSBLUE Monarch ORP Probe POM AT-SB-PROBE-ORP-P can be used for environmental water quality monitoring, acid/alkali/salt solution, chemical reaction process, industrial production process, and can meet the requirements of online ORP measurement for most industrial applications.

=== 2. Features ===

* Signal output: RS-485 (Modbus/RTU protocol).
* Conveniently connect to third-party equipment such as PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen.
* Double high impedance differential amplifier, strong anti-interference and fast response speed.
* Durable ORP electrode, the internal reference fluid seeps out from the microporous salt bridge very slowly under a pressure of at least 100KPa (1Bar), and its positive seepage lasts for more than 20 months. Such a reference system is very stable, and the electrode life is doubled compared to ordinary industrial electrodes.
* Easy to install: 3/4NPT pipe thread is convenient for sinking installation or installation in pipelines and tanks.
* IP68protection level.
* R-485 interface, Modbus/RTU protocol.

=== 3. Technical Specifications ===
{| class="wikitable tech-table"
!'''Model'''
!'''AT-SB-PROBE-ORP-P'''
|-
|Measuring Range
| -1500～+1500mV
|-
|Accuracy
|±6mV
|-
|Resolution
|1mV
|-
|Temperature Range
|0 ~65℃
|-
|Work Pressure
|＜0.1MPa
|-
|Output
|RS-485, MODBUS protocol
|-
|Power Supply
|12～24VDC ±10%
|-
|Wetted Part Material
|POM
|-
|Installation
|Immersion mounting, 3/4 NPT thread
|-
|Cable Length
|15m
|-
|Calibration Method
|One-point calibration
|-
|Power Consumption
|＜0.3W@12V
|-
|Ip Grade
|IP68
|}

=== 4. Dimension ===
[[File:ORP Probe dimensions.svg|center|frameless|540x540px]]

=== 5. Installation and Electrical Connection ===

==== 5.1 Install ====
Note: The sensor should not be installed upside down or horizontally when installed, at least at an angle of 15 degrees or more.
[[File:Instalation.svg|center|frameless|600x600px]]

==== 5.2 Electrical connection ====

* Red wire-power cord（12～24 V）
* Black wire-ground wire（GND）
* Blue Line-485 A
* White Line-485 B

Check the wiring sequence carefully before powering on to avoid unnecessary losses caused by wiring errors.

==== 5.3 Wiring instructions ====
Considering that the cables have been immersed in water (including seawater) or exposed to air for a long time, all wiring positions are required to be waterproof, and the cables should have certain corrosion resistance.

=== 6. Maintenance ===

==== 6.1 Use and maintenance ====
When measuring the ORP electrode, it should be cleaned in distilled water (or deionized water) first, and the water should be absorbed with filter paper to prevent impurities from being brought into the test solution. 1/3 of the electrode should be inserted into the test solution. The electrode should be cleaned when not in use and inserted into a protective cover with 3.5mol/L potassium chloride solution or inserted into a container with 3.5mol/L potassium chloride solution. Check whether the terminal is dry, if it is stained, wipe it with absolute alcohol and blow it dry before use. Avoid long-term immersion in distilled water or protein solution and prevent contact with silicone grease. For electrodes that have been used for a long time, its glass membrane may become translucent or attached with sediment. In this case, it can be washed with diluted hydrochloric acid and rinsed with water. The electrode has been used for a long time, and when there is a measurement error, it must be calibrated and corrected with the meter. When the electrode is still unable to be calibrated and measured when the electrode is maintained and maintained by the above method, it means that the electrode has failed. Please replace the electrode.

==== 6.2 ORP standard solution preparation method ====
a) Preparation method of ORP standard solution 256mV Weigh 2.1 g of quinhydroquinone and add it to 200 mL of a standard pH buffer solution with a pH of 4.00 and mix well.

b) Preparation method of ORP standard solution 86mV Weigh 2.1 g of quinhydroquinone and add it to 200 mL of a standard pH buffer solution with a pH of 6.86 and mix well.

c) Preparation method of ORP standard solution-40mV Weigh 2.1 g of quinhydroquinone and add it to 200 mL of a standard pH buffer solution with a pH of 9.18 and mix well.

Please note that when preparing the pH, a total of 250 mL is prepared, and 200 mL is measured for use.

Method of preparing corresponding standard solution for pH:

Measure 250mL of distilled water with a graduated cylinder, pour it into a beaker, add a package of calibration powder with pH=6.86/4.00/9.18, stir with a glass rod until the powder is completely dissolved, and prepare a solution with pH=6.86/4.00/9.18.

==== 6.3 Calibration ====
Put the sensor into the prepared 86mV (or 256mV or-40mV) solution and wait for 3 to 5 minutes. After the value is stable, check whether the displayed value is 86mV (or 256mV or-40mV). If not, you need to calibrate it. See the appendix for calibration instructions.

==== 6.4 Precautions ====

* Avoid exposing the inner surface of the fluorescent film head to sunlight
* Please do not touch the fluorescent film with your hands
* Avoid bubbles adhering to the surface of the fluorescent film during measurement and calibration
* Avoid applying any mechanical stress (pressure, scratches, etc.) directly to the fluorescent film during use

=== 7. Appendix data communication ===

==== 7.1 Data Format ====
The default data format for Modbus communication is: 9600, n, 8, 1 (baud rate 9600bps, 1 start bit, 8 data bits, no parity, 1 stop bit).

==== 7.2 Modbus Frame Format (xx represents a byte) ====
a) Read data instruction frame
{| class="wikitable"
|06
|03
|xx xx
|xx xx
|xx xx
|-
|Address
|FC
|Register start address
|Number of registers
|CRC check code (low bytes in front)
|}
b) Read data response frame
{| class="wikitable"
|06
|03
|xx xx
|xx xx
|xx xx
|-
|Address
|FC
|Number of bytes
|Response data
|CRC check code (low bytes in front)
|}
c) Write data instruction frame
{| class="wikitable"
|06
|06
|xx xx
|xx xx
|xx xx
|-
|Address
|FC
|Register address
|Read-in data
|CRC check code (low bytes in front)
|}
d) Data response frame
{| class="wikitable"
|06
|06
|xx xx
|xx xx
|xx xx
|-
|Address
|FC
|Register address
|Read-in data
|CRC check code (low bytes in front)
|}

==== 7.3 Register Address ====
{| class="wikitable tech-table"
!'''Register Address'''
!'''Name'''
!'''Instruction'''
!'''Number of Registers'''
!'''Access Method'''
|-
|40001 (0x0000)
|Measured value
|Two double-byte integers are the measured value and the number of decimal places of the measured value.
|2 (4 bytes)
|Read
|-
|44097 (0x1000)
|Zero calibration
|Calibrate in the standard solution, the written data is the actual value of the standard solution.
|1 (2 bytes)
|Write
|-
|44103 (0x1006)
|Zero calibration value
|The read data is the zero offset.
|1 (2 bytes)
|Read
|-
|48195 (0x2002)
|Sensor address
|The default is 6, and the write data range is 1-127.
|1 (2 bytes)
|Write/Read
|-
|48225 (0x2020)
|Reset sensor
|The calibration value is restored to the default value, and the write data is 0. Note that the sensor needs to be calibrated again after reset before it can be used.
|1 (2 bytes)
|Write
|-
|44105(0x1008)
|Slope calibration value
|The read data is the slope value x1000
|1 ( 2 bytes)
|Read
|-
|44113(0x1010)
|Temperature calibration
|Calibrated in solution, the data written is the actual temperature value x10 ; the read data is the temperature calibration offset x10 .
|1 ( 2 bytes)
|Write/Read
|-
|48195(0x2002)
|Sensor address
|The default is 6 and the data range is 1-127
|1 ( 2 bytes)
|Write/Read
|-
|48225(0x2020)
|Reset sensor
|The calibration value is restored to the default value and the write data is 0. Note: the sensor needs to be calibrated again after resetting.
|1 ( 2 bytes)
|Write
|}

File:ORP Probe dimensions.svg

WikiManagement — Mon, 13 Jul 2026 11:07:54 GMT

WikiManagement uploaded File:ORP Probe dimensions.svg

New page

ORP Probe dimensions

File:Orp Probe Dimensions.png

WikiManagement — Mon, 13 Jul 2026 11:03:55 GMT

WikiManagement uploaded File:Orp Probe Dimensions.png

New page

Orp Probe Dimensions

File:ORP-100-PH-10-ORP-10-PH-100.png

WikiManagement — Mon, 13 Jul 2026 10:57:03 GMT

WikiManagement uploaded File:ORP-100-PH-10-ORP-10-PH-100.png

New page

ORP

Main Page

WikiManagement — Mon, 13 Jul 2026 10:52:43 GMT

Probes

← Older revision		Revision as of 10:52, 13 July 2026
Line 124:		Line 124:

	'''[[RS-485 pH Probe AT-SB-PROBE-pH-P\|pH]]'''		'''[[RS-485 pH Probe AT-SB-PROBE-pH-P\|pH]]'''
			<span class="product-subtitle">Probes</span>
			</div>

			<div class="product-item">[[File:PH.svg\|center\|frameless\|106x106px\|class=product-image\|link=RS-485 ORP Probe POM AT-SB-PROBE-ORP-P]]

			'''[[RS-485 ORP Probe POM AT-SB-PROBE-ORP-P\|ORP]]'''
	<span class="product-subtitle">Probes</span>		<span class="product-subtitle">Probes</span>
	</div>		</div>

SENSBLUE ATLAS/Realease Notes

WikiManagement — Wed, 08 Jul 2026 10:12:48 GMT

← Older revision		Revision as of 10:12, 8 July 2026
Line 17:		Line 17:
	* Added lsusb output command on SystemHealth actor;		* Added lsusb output command on SystemHealth actor;
	* Added get hardware info on SystemHealth actor;		* Added get hardware info on SystemHealth actor;
	* SystemHealth reports the ram and disk usage, free space and total;		* SystemHealth reports the ram and disk usage, free space and total.
	* SystemManager Production actor auto provisions the hostname and Wi-Fi Access Point after EEPROMcommissioning, with device serial number.

	=== Improvements: ===		=== Improvements: ===